CM-1600 Managed Gigabit PTP/NTP Ethernet Switch

The CM-1600 is a reliable and accurate PTP Grand Master Clock fulfilling IEEE 1588 Std 2002 (v1) or IEEE 1588 Std 2008 (v2). The Grand Master Clock will be in passive mode and the switch will act as a PTP Transparent Clock if a better Grand Master Clock alternative is available in the network. The unit contains a built-in GPS receiver.

  • 8 x 10/100/1000BASE-TX ports
  • PTP v1 or v2 Grand Master Clock
  • PTP v1 or v2 Transparent Clock
  • Built-in GPS receiver
  • Accuracy < 50 nanosecond
  • Network redundancy: OnTime-Ring- or MSTP/RSTP/STP protocol
  • Network management: Web, telnet, CLI and SNMP v1/v2/v3 with RMON
  • Multicast filtering: IGMP snooping or static multicast filters
  • IEEE802.1Q VLAN
  • Event notification: through Syslog, Email and SNMP trap
  • Wide operating temperature: [-40°F to 158°F] / [-40°C to 70°C]
  • 28VDC power input

 

CM1600  CM1600 Front

The switch in the CM-1600 series offer full management based on HTTP, telnet, CLI or SNMP. Network Redundancy is achieved based on the OnTime-Ring- or MSTP/RSTP/STP (IEEE 802.1s/w/D) protocol. The switch is designed for aircraft environments. The switch offers a wide operating temperature range: [-40°F to 158°F] / [-40°C to 70°C].
Ruggedised military approved connectors are used for both the Ethernet ports and the power connector. A connector for general purpose IO interface is available for future use.

 

We use cookies to improve our website and your experience when using it. Cookies used for the essential operation of this site have already been set. To find out more about the cookies we use and how to delete them, see our privacy policy.

  I accept cookies from this site.
EU Cookie Directive Module Information