Time Code Displays & Monitors

A range of time code displays and monitors to display timestamps recorded with video, film, telemetry, radar, and other data. We are also able to offer aircraft mounted systems as well as units designed to work with Night vision Goggles (NVG).

Model 6135 miniature time code monitor

ITS Model 6135B Miniature Time Code display

The ITS Model 6135B Airborne Time Code Display, decodes and displays an applied IRIG B Serial Time Code signal. The unit displays the time as Hours, Minutes and Seconds on an LED display.
The 6135B displays the applied time code, or in the absence of an applied signal, the internal clock.
Display is six digits, HH:MM:SS. The display intensity is user adjustable via a front panel selector switch. If there is a loss of serial time code input, the displayed colons flash at a 1Hz rate to alert the operator that the unit is operating on the internal clock.
The 6135B is housed in an aluminium enclosure, 5.75 inches wide, 1.5 inches high and 5 inches deep (not including rear panel connectors) designed for aircraft mounting. Power and the serial time code signal are applied via two rear panel connectors The 6135B is powered by 15 to 36 VDC. < 2 Watts It is designed to meet “Safety of Flight” requirements.

6075 Time Code Display

ITS Model 6075 Time Code Display

The ITS Model 6075A Time Code Display is a two function 9-character shelf-mount unit that decodes the NASA 36 or IRIG B Serial Time Code and also performs a counter function. The unit displays the time or alternatively the counter state as selected. A 12-charecter panel-mount version is available as the model 6075PM.

6275 Time Code Display

ITS Model 6275 Time Code Display

The ITS Model 6275 Time Code Display is a compact rack mounted unit that decodes and displays the IRIG B Serial Time Code. The unit displays the time as Days, Hours, Minutes and Seconds on an LED display. Unique packaging allows for full one inch high numerals while occupying only 1.75 inches of rack height. The 6275 displays the applied time code, or in the absence of an applied signal, the internal clock. Display is nine digits, DDD:HH:MM:SS. The display intensity is user adjustable via a front panel selector switch. If there is a loss of serial time code input, the displayed colons flash at a 1Hz rate to alert the operator that the unit is operating on the internal clock.

The 6275 is housed in a rack mountable aluminum enclosure, 19 inches wide, 1.75 inches high and 1.5 inches deep (not including rear panel connectors). All circuitry is on a single SMT printed wiring assembly.

Model 6062 hand held time code monitor

ITS Model 6062 Time Code Monitor

The ITS Model 6062 Time Code Monitor is a hand held, battery powered unit that provides a means of verifying the IRIG B serial time code and event outputs of LED camera drivers. The unit will display time derived from both serrated, non-serrated and demodulated IRIG formats. An automatic power shut down feature prevents battery drain when no signal is applied for a period of time. The 6062 is housed in a high impact plastic case and contains 16 digit LCD time display and event indicator. It is powered by four AA batteries and includes a battery eliminator pack.

 

 

We use cookies to improve our website and your experience when using it. Cookies used for the essential operation of this site have already been set. To find out more about the cookies we use and how to delete them, see our privacy policy.

  I accept cookies from this site.
EU Cookie Directive Module Information